Raptor Black Urethane Spray-On Truck Bed Liner Kit, Protective Paint With Spray Gun, For Tailgates & Trucks, Vehicle Undercoating, 8 Litres

The Raptor Liner spray is the bomb! I had a lot of rust spots on a 2008 Chevy Silverado crew cab 4×4 that I had inherited and it was a hot mess. The rear wheel wells were completely eaten away from rust. I had to cut out the rust area it was that bad. I rebuilt them with fiberglass and bondo. I also addressed the rust on other body parts. I sanded and primed those areas. I used 80 grit on my sander and sanded the entire vehicle that was to be sprayed. I also sanded the plastic and chrome by hand. I cleaned the vehicle and taped up those parts that I didn’t want sprayed. I purchased UPOL Grip 4 and sprayed the bondo area, chrome and plastic for better adhesion. I had purchased the 8 bottle kit with spray gun and hardener. I set the PSI on my compressor at 55 and I began the spraying. I wore a respirator and gloves. First thing I noticed was that the overspray was very minimal. I was very happy about that. The Raptor material went on perfectly and I started off with a light/medium coat and after waiting an hour the second coat was heavier. I was extremely surprised at how well it went on. I did spend a lot of time prepping the vehicle. I believe that made a lot of difference. I went thru 7 1/2 bottles. I did not spray the bed. Everything else was sprayed to include all chrome and plastic. It turned out fantastic!!! The material covered up the fiberglass/bondo and it looks amazing!!! My wife was shocked from seeing all the rust spots to then seeing a new like vehicle. Treat the rusts if you can’t get to bare metal while sanding. The vehicle is curing for the next 4 days. I took the tires off and sanding the rims due to corrosion. I will use etching primer, Rustoleum black wheel paint, and clear coat. I probably had 10 hours of body work due to the rust and fiberglass/bondo. Then another 1-2 hours of taping areas not being sprayed. The spray gun in the kit is perfect for the job. If you have a rusty truck this is the way to go. Fun project!!! I’m now looking for another project truck to fix and Raptor line and I’ll flip that truck. Take your time, do the prep work and just have fun watching the transformation.